Body Control Module Replacement

Fig 1: Locating Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the drivers side instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement .
1	Body Control Module Screws (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb ft)
2	Body Control Module Tip: Disconnect the electrical connectors. Reprogram the body control module. Refer to Control Module References for programming and setup information.