LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> Rear Side Door Actuator Control Module Programming and Setup >> Power Sliding Door Module Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Sliding Door Module Reprogramming

Service parts are programmed during the manufacturing process and no additional programming should be necessary. However, in the event that a software change to the PSD is implemented after the start of production, the PSDM can be reprogrammed using the service programming procedure. Refer to Service Programming System (SPS) .

scientia non olet · About LEMON Manuals