Remote Control Door Lock Receiver Replacement

If the remote control door lock receiver is replaced, the following procedures must be performed:

1. Keyless Entry Transmitter Programming - Refer to Transmitter Programming .
2. Tire Type Setup:
   1. Install a scan tool
   2. Select Remote Control Door Lock Receiver Module Setup in the Body menu.
   3. Select Tire Type/Pressure Selection.
   4. Follow the on-screen instructions.
3. Tire Pressure Monitoring Sensor Learn - Refer to Tire Pressure Sensor Learn .
4. RCDLR Setup:
   1. Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
   2. Select Setup New RCDLR.
   3. Follow the on-screen instructions.