LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the steering column. Refer to Steering Column Replacement .
  2. Remove the trim covers from the steering column. Refer to Steering Column Trim Covers Replacement .
    3. Fig 1: View Of Shift Lock Actuator Linear Shift Front Bolts
    GM1538449Courtesy of GENERAL MOTORS CORP.
  3. Remove the linear shift front bolts (2).
    4. Fig 2: Identifying Linear Shift Assembly And Bolts
    GM1538450Courtesy of GENERAL MOTORS CORP.
  4. Loosen the liner shift rear bolt (1).
  5. Rotate the linear shift assembly (2) down to access the shift lock actuator screws.
    6. Fig 3: Identifying Shift Lock Actuator, Electrical Connector And Bolts
    GM1538451Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the shift lock actuator electrical connector (1).
  7. Remove the shift lock actuator screws (3).
  8. Remove the shift lock actuator (2) from the linear shift assembly.
scientia non olet · About LEMON Manuals