LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement - Right Side >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Primary Fuel Tank Module & Seal
    GM2195469Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW seal (2) and partially install the primary fuel tank module (1).
    2. Fig 2: Fuel Transfer Hose Quick Connect Fitting
    GM2195468Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel transfer hose quick connect fitting (1). Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 3: Lock Ring
    GM2195460Courtesy of GENERAL MOTORS CORP.
  3. Use the J 45722:  wrench by turning clockwise and install the lock ring (1).
    4. Fig 4: Fuel Pump Electrical Connector & Fuel Feed Line
    GM2195459Courtesy of GENERAL MOTORS CORP.
  4. Connect the fuel pump electrical connector (1) and the fuel feed line (2). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals