Camshaft Position Sensor Replacement - Intake

Fig 1: Camshaft Position Sensor - Intake

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the fuel feed intermediate pipe. Refer to Fuel Feed Intermediate Pipe Replacement .
1	Camshaft Position Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Camshaft Position Sensor O-ring Procedure: Lubricate the camshaft position sensor O-ring seal with clean engine oil.
3	Camshaft Position Sensor Procedure Disconnect the sensor harness connector. Inspect the camshaft position sensor for damage, replace as necessary.