LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> HHR SS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Engine Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: ECM/TCM Cover
    GM1631889Courtesy of GENERAL MOTORS CORP.
  1. Using a scan tool, retrieve the percentage of remaining engine oil. Record the remaining engine oil life.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the ECM/TCM cover.
    4. Fig 2: ECM Electrical Connector
    GM2000940Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the ECM electrical connectors (1).
    5. CAUTION: Control module damage may result when the metal case contacts battery voltage. DO NOT contact the control module metal case with battery voltage when servicing a control module, using battery booster cables or when charging the vehicles battery.
  5. Disengage the plastic retainer tabs (2) and remove the ECM (3).
    6. Fig 3: View of ECM Retaining Tab
    GM1833662Courtesy of GENERAL MOTORS CORP.
  6. Release the retaining tab (1) in order to release the ECM from the underhood junction block bracket.
scientia non olet · About LEMON Manuals