LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> HHR SS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Fuel Pump Module
    GM1636703Courtesy of GENERAL MOTORS CORP.
  1. Carefully slide the fuel level sensor into the slots on the reservoir.
  2. Slide the sensor down until the retaining tabs (2) engage the sensor.
  3. Install the fuel pump module. Refer to Fuel Pump Module Replacement .