LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Camaro LS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Feed Intermediate Pipe Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front .
  2. Remove the high pressure pump shield. Refer to Fuel Pipe Shield Replacement .
  3. Relieve fuel system pressure. Refer to Fuel Pressure Relief .
    4. Fig 1: Identifying High Pressure Pipe Fitting, Left Fuel Rail & High Pressure Fuel Pipe
    GM1977757Courtesy of GENERAL MOTORS CORP.
  4. Remove the foam insulator from the pipes.
  5. Loosen the high pressure pipe fitting to the high pressure fuel pump (1).
  6. Loosen the high pressure pipe fitting to the left fuel rail (3).
  7. Remove the high pressure fuel pipe (2) from the vehicle. Discard the pipe.
scientia non olet · About LEMON Manuals