Unsuccessful Programming Recovery
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
In the event of an interrupted or unsuccessful programming event, perform the following steps:
- DO NOT turn the ignition OFF. Ensure that all Frontview Camera Module, DLC and programming tool connections are secure and the TIS terminal operating software is up to date.
- Attempt to reprogram the Frontview Camera Module.
- If the Frontview Camera Module can still not be programmed, turn the ignition OFF for at least one minute.
- Turn the ignition ON and attempt to reprogram the Frontview Camera Module. The Frontview Camera Module should program.
- If the Frontview Camera Module still cannot be programmed, replace the Frontview Camera Module.