LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Programming And Setup - All Systems) >> Repair Instructions >> Multi-Axis Acceleration Sensor Module Programming and Setup >> Multi-Axis Acceleration Sensor Module Configuration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-Axis Acceleration Sensor Module Configuration

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

A replacement multi-axis acceleration sensor module, requires the following procedure:

  1. With a scan tool, access the Service Programming System (SPS) and follow the on-screen instructions. Refer to Service Programming System (SPS) .
  2. On the SPS Supported Controllers screen, select IMU Inertia Sensor Module - Configuration and follow the on-screen instructions.
  3. With a scan tool, clear all DTC's from all modules.
  4. Calibrate the yaw sensor using the scan tool. Refer to Vehicle Yaw Sensor Learn .
scientia non olet · About LEMON Manuals