Rear Seat Heater Control Module Programming and Setup: Notes
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
The rear seat heating control module must be programmed with the proper calibration software. The module stores and utilizes this information however if it is not properly configured with the correct calibration software, the rear seat heating control module will not control all of the vehicle features properly.
Ensure that the following conditions exist in order to prepare for rear seat heating control module programming:
- The battery is fully charged.
- The MDI data link connectors are secure.
- The scan tool is loaded with the most current software version.
- All disconnected modules and devices are reconnected securely.
- This entire procedure has been reviewed before proceeding.
Do not reprogram the rear seat heating control module unless directed by a service procedure or a service bulletin.