Replace and Program Control Module or Reprogram Control Module
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
To program a replacement control module, perform the following procedure:
- Access the Service Programming System (SPS) and follow the on-screen instructions.
- On the SPS Supported Controllers screen, select SEQ Programming Sequence Seat Belt Retractor Motor Module - Left/Right (M101L/M101R) and follow the on-screen instructions.
- At the end of programming, choose the "Clear All DTCs" function on the SPS screen.