LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Programming And Setup - All Systems) >> Repair Instructions >> Trailer Lamp Control Module Programming and Setup >> Trailer Lighting Control Module Configuration/Reconfiguration and Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trailer Lighting Control Module Configuration/Reconfiguration and Setup

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

If the trailer lighting control module is replaced or installed as an after sales accessory, both the configuration/reconfiguration and setup procedures must be performed.

  1. Access the Service Programming System (SPS) and follow the on-screen instructions. Refer to Service Programming System (SPS) .
  2. On the SPS Supported Controllers screen, select Trailer Interface (Control) Module - Configuration and Setup.
  3. On the Control Module - Configuration and Setup Function(s) screen, select both ECU Configuration/Reconfiguration and ECU Setup menu options and follow the on-screen instructions.
  4. Clear DTCs after completing the configuration/reconfiguration and setup procedures.

If the trailer lighting control module fails to accept the configuration/reconfiguration and setup procedures, verify all scan tool and trailer lighting control module connections are secure.

scientia non olet · About LEMON Manuals