LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Camaro LS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Line Replacement - Chassis >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Fuel Feed Connector, Evaporative Emission Connector, Exhaust Heat Shield & Fasteners
    GM2194736Courtesy of GENERAL MOTORS CORP.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  2. Disconnect the fuel feed connector (1) and the evaporative emission connector (2). Refer to Metal Collar Quick Connect Fitting Service  and Plastic Collar Quick Connect Fitting Service .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the exhaust heat shield fasteners (3) and the exhaust heat shield (4).
  5. Fig 2: Exhaust Heat Shield & Fastener
    GM2194739Courtesy of GENERAL MOTORS CORP.
  6. Remove the exhaust heat shield fastener (1) and the exhaust heat shield (2).
  7. Fig 3: Brake Pipe Heat Shield & Fastener
    GM2194740Courtesy of GENERAL MOTORS CORP.
  8. Remove the brake pipe heat shield fastener (1) and the heat shield (2).
  9. Fig 4: Plastic Retainer & Retaining Nut
    GM2194746Courtesy of GENERAL MOTORS CORP.
  10. Remove the plastic retainer (1) and the retaining nut (2).
  11. Fig 5: Fuel Feed Line & Evaporative Emission Line Clips
    GM2194747Courtesy of GENERAL MOTORS CORP.
  12. Separate the fuel feed line and the evaporative emission line from the clips (1).
  13. Fig 6: Protector Bracket & Fasteners
    GM2194773Courtesy of GENERAL MOTORS CORP.
  14. Remove the protector bracket fasteners (1) and remove the bracket (2).
  15. Fig 7: Fuel Feed Line & Evaporative Emission Line
    GM2194775Courtesy of GENERAL MOTORS CORP.
  16. Disconnect the fuel feed line (1) and the evaporative emission line (2). Refer to Metal Collar Quick Connect Fitting Service  and Plastic Collar Quick Connect Fitting Service .
  17. Remove the pipes (3) from the vehicle.