LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.0L - Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Electrical Connector And Fuel Tank Pressure Sensor
    GM2214631Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW fuel tank pressure sensor seal (3).
    2. NOTE:

    Do not damage the retainer (5).

  2. Lift the retainer (5).
    3. NOTE:

    Listen for and audible click to confirm correct installation of the fuel pressure sensor to the retainers (4)

  3. Install the fuel tank pressure sensor (1) to the fuel tank (6).
  4. Lock the retainer (5) into its locking position.
  5. Connect the electrical connector (2) to the fuel tank pressure sensor (1).
  6. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals