LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Engine Performance >> System >> Data Communications System >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Primary) , Battery Negative Cable Disconnection and Connection (Auxiliary) .
    2. WARNING:

    Refer to SIR Warning .

  2. Disable the SIR system. Refer to SIR Disabling and Enabling .
  3. Remove the left floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Left Side (LHD) .
    4. Fig 1: Identifying BCM Electrical Connectors
    GM1955548Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the body control module (BCM) electrical connectors (1) from the BCM (2).
    5. Fig 2: Identifying BCM Upper & Lower Retaining Clips
    GM1955549Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Release the lower retaining clips (1), lift the BCM and unhook the upper retaining clip (2).

  5. Remove the BCM and the bracket assembly (3).
  6. Remove the BCM from the bracket.
scientia non olet · About LEMON Manuals