| Air Cond Compressor Oil |
|
|
5.00 OZS. |
0.14 L |
PAG 46 |
|
S |
| Air Cond Refrigerant |
|
|
1.10 LBS. |
0.49 KG |
R-134a |
|
S |
| Automatic Transmission Fluid |
|
Complete Trans System |
13.20 QTS. |
12.49 L |
Automatic Transmission Fluid DEXRON VI |
|
S |
| Automatic Transmission Fluid |
|
Overhaul |
12.50 QTS. |
11.82 L |
Automatic Transmission Fluid DEXRON VI |
|
S |
| Automatic Transmission Fluid |
|
Pan Removal |
6.50 QTS. |
6.15 L |
Automatic Transmission Fluid DEXRON VI |
|
S |
| Brake Fluid |
|
|
N/A |
N/A |
DOT 3 Brake Fluid |
|
S |
| Differential Gear Oil |
Base |
|
2.12 QTS. |
2 L |
DEXRON LS Gear Oil |
|
S |
| Engine Coolant |
6.2L Eng,Eng CD LS3 |
|
11.90 QTS. |
11.26 L |
50/50 mixture of DEX-COOL and clean, drinkable water |
After refill, the level must be checked. Add enough engine coolant so that the fluid is within the proper operating range. |
S |
| Engine Oil |
6.2L Eng,Eng CD LS3 |
w/Filter,w/Z52 Dry Sump Oil System |
10.50 QTS. |
9.93 L |
API - SAE 5W-30 |
The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50.
Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
|
S |
| Engine Oil |
6.2L Eng,Eng CD LS3 |
w/Filter |
6.00 QTS. |
5.67 L |
API - SAE 5W-30 |
The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50.
Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
|
S |
| Engine Oil |
6.2L Eng,Eng CD LS3 |
w/o Filter |
5.70 QTS. |
5.39 L |
API - SAE 5W-30 |
The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50.
Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
|
S |
| Fuel Tank |
|
|
18.00 GALS. |
68.13 L |
|
|
S |
| Manual Transmission Fluid |
Base |
|
3.60 QTS. |
3.4 L |
Manual Transmission Fluid |
GM Part No. 88861800. |
S |
| Power Steering Fluid |
|
|
N/A |
N/A |
GM Power Steering Fluid |
GM Part No. 89021184. |
S |
| Windshield Washer Fluid |
|
|
N/A |
N/A |
Optikleen Windshield Washer Fluid |
Follow the Manufacturer's Instructions for the mixture ratio. |
S |