LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Rear Toe Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Toe Adjustment

  1. Remove the small boot clamp from the boot so as not to allow the boot turn when adjusting the toe.
    2. Fig 1: Rear Suspension Adjustment Link Lock Nut & Inner Tie Rod
    GM192836Courtesy of GENERAL MOTORS CORP.
  2. Loosen the rear suspension adjustment link lock nut (1).
  3. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
    4. CAUTION: Refer to Fastener Caution .
  4. Tighten the rear suspension adjustment link lock nut to 70 N.m (52 lb ft).
  5. Check the toe setting after tightening.
  6. Adjust the toe setting if necessary.
  7. Reinstall the small boot clamp.
scientia non olet · About LEMON Manuals