Removal Procedure
NOTE:
Clean the fuel connection and surrounding areas, prior to disconnecting the lines, in order to avoid possible system contamination.
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
- Remove the brake master cylinder and reposition. Refer to Master Cylinder Replacement .
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027) or Fuel Pressure Relief (CH 48027) .
- Disconnect the fuel feed line (1) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
- Open the fuel/brake pipe retainers (1).
- Remove the fuel feed line from the fuel/brake pipe retainers (1).
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the fuel/brake line retainer bolt.
- Remove the fuel feed line from the retainer.
- Remove the fuel/brake line push in retainer from the underbody.
- Remove the fuel feed line from the retainer.
- Remove the fuel/brake line retainer bolts.
- Remove the fuel feed line from the retainer.
- Open the fuel/brake line retainer (1).
- Remove the fuel feed line from the retainer.
- Disconnect the fuel feed (3) and evaporative emission (EVAP) (4) lines from the fuel tank lines (1, 2). Refer to Plastic Collar Quick Connect Fitting Service .
- Remove the fuel feed line.