LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Impala LTZ >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.9L - Repair Instructions >> Repair Instructions >> Metal Collar Quick Connect Fitting Service >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Oiling Male Pipe Ends (Metal Collar)
    GM12784Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Fuel Pipe Fitting Warning .
  1. Apply a few drops of clean engine oil to the male pipe end.
    2. Fig 2: View Of Connectors (Metal Collar)
    GM12786Courtesy of GENERAL MOTORS CORP.
  2. Push both sides of the fitting together in order to snap the retaining tabs into place.
    3. Fig 3: Quick-Connect Fitting
    GM12787Courtesy of GENERAL MOTORS CORP.
  3. Once installed, pull on both sides of the fitting in order to make sure the connection is secure.
    4. Fig 4: Relieve Fuel System Pressure
    GM1555554Courtesy of GENERAL MOTORS CORP.
  4. Install the retainer to the fuel feed quick-connect fitting.
scientia non olet · About LEMON Manuals