Remote Control Door Lock Receiver Replacement

WARNING: This page is about a different car, the 2010 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement . Program the remote control door lock receiver after replacement. Refer to Control Module References .
1	Remote Control Door Lock Transmitter Assembly Tip: Disconnect the electrical connector. Push the 2 tabs towards the module assembly in order to release the module.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel (I/P) upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .
Program the remote control door lock receiver after replacement. Refer to Control Module References .

Remote Control Door Lock Transmitter Assembly
Tip:

Disconnect the electrical connector.
Push the 2 tabs towards the module assembly in order to release the module.