Installation Procedure

Fig 1: Air Inlet Duct & MAF/IAT Sensor

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Tighten the air inlet duct clamp at the MAF/IAT sensor.
Tighten: Tighten the clamp to 3 N.m (27 lb in).
Install the air inlet duct to the throttle body.
Tighten the air inlet duct clamp at the throttle body.
Tighten: Tighten the clamp to 3 N.m (27 lb in).
Connect the PCV tube to the air inlet duct. Refer to Plastic Collar Quick Connect Fitting Service .