Connecting Rod, Engine

Connecting Rod Bearing Cap Bolt

First Pass 25 Nm (18 lb ft)
Final Pass 110 degrees

Connecting Rod Bearing Clearance 0.018-0.062 mm (0.0007-0.017 in)

Connecting Rod Bore Diameter 60.322-60.338 mm (2.375-2.376 in)

Connecting Rod Bore Out-of-Round 0.006 mm (0.00023 in)

Connecting Rod Side Clearance 0.200-0.241 mm (0.008-0.009 in)