Removal Procedure
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
- Relieve the fuel system pressure. Refer to the Fuel Pressure Relief (Without CH-48027) , Fuel Pressure Relief (CH-48027) , Fuel Pressure Relief (High Side) .
- Remove the fuel feed line quick connect fitting retainer.
- Blow dirt out of the fitting using compressed air.
- Choose the correct tool from the J 37088-A Tool Setfor the size of the fitting. Insert the tool into the female connector, then push inward in order to release the locking tabs.
- Pull the connection apart.
- Use a clean shop towel in order to wipe off the male pipe end.
- Inspect both ends of the fitting for dirt and burrs. Clean or replace the components as required.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
CAUTION:
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
WARNING:
Refer to Relieving Fuel Pressure Warning .