LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Chevrolet
>>
2011
>>
Traverse LS, FWD
>>
Repair and Diagnosis
>>
Engine Performance
>>
Engine Control Systems
>>
Engine Controls And Fuel - 3.6L - Repair Instructions
>>
Repair Instructions
>>
Ignition Coil Replacement - Bank 2
>>
Removal Procedure
April 5, 2026:
LEMON Manuals is launched!
Read the announcement.
Removal Procedure
Fig 1: Identifying Engine Wiring Harness Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Remove the intake manifold. Refer to
INTAKE MANIFOLD REPLACEMENT
Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s) (4).
Fig 2: Identifying Left Cylinder Head Ignition Coils
Courtesy of GENERAL MOTORS CORP.
Remove the ignition coil bolt(s).
Remove the ignition coil(s).