Circuit/System Verification
WARNING:
The Volt Battery Pack will utilize an exchange program. Please consult the most recent revision of bulletin/PI #PIP4841, available in Service Information (SI), for a list of approved Volt Battery Pack service procedures. Components that may be removed and serviced without exchanging the complete battery pack are identified in the bulletin/PI. Please contact the GM Technical Assistance Center (1-877-446-8227) if you have any questions.
If the DTC P1EB1 is set, program the K16 battery energy control module. This DTC should not reset.
- If the DTC resets without other DTCs set, replace the K16 battery energy control module.
- If the DTC resets along with any of the DTCs P1EB2, P1EB3, P1EB4, or P1EB5 set, refer to DTC P1EB2-P1EB5 .