Fuel Feed Pipe Replacement

Fig 1: View Of Fuel Feed Pipe Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Relieve the fuel system pressure. Refer to Fuel Pressure Relief . Remove the fuel pipe shield. Refer to Fuel Pipe Shield Replacement .
1	Fitting CAUTION: Refer to Fastener Caution . Tighten 28 N.m (21 lb ft)
2	Bolt (Qty: 2) Tighten 50 N.m(37 lb ft)
3	Fuel Feed Pipe Procedure Discard the pipe when removed, and install a new pipe. Ensure that the high pressure fuel pipe, and fuel pump fittings are clean and dry prior to assembly. Pressure up the fuel system and check for leaks.