K9 Body Control Module X4
 Courtesy of
|
Connector Part Information
- Harness Type: Instrument Panel
- OEM Connector: 13594129
- Service Connector: 19151263
- Description: 26-Way F 0.64 2.8 Series (BK)
|
Terminal Part Information
- Pins: 1-4
- Terminated Lead: 13575560
- Release Tool: J-38125-12A
- Diagnostic Test Probe: J-35616-35 (VT)
- Terminal/Tray: SNAC-A061T-M2.8/20
- Core/Insulation Crimp: E/A
- Pins: 5-7, 9, 11-18, 20-24, 26
- Terminated Lead: 13575870
- Release Tool: J-38125-12A
- Diagnostic Test Probe: J-35616-64B (L-BU)
- Terminal/Tray: SNAC3-A021T-M0.64/20
- Core/Insulation Crimp: J/J
|
K9 Body Control Module X4
| Pin |
Wire |
Circuit |
Function |
| 1 |
0.8 D-BU |
7539 |
DRL Control |
| 2 |
0.8 L-BU |
7538 |
DRL Control |
| 3 |
0.5 D-BU/WH |
1315 |
Right Front Turn Signal Lamp Supply Voltage |
| 4 |
0.5 D-GN/WH |
1335 |
Right Rear Turn Signal Lamp Supply Voltage |
| 5 |
0.5 BN/WH |
309 |
Right Park Lamp Supply Voltage |
| 6 |
0.5 PU |
709 |
Left Park Lamp Supply Voltage |
| 7 |
0.5 BN/L-BU |
6993 |
Marker Lamps Control (without T90) |
| 0.5 YE |
7542 |
Left Rear Stop Lamp Supply Voltage (T90) |
| 8-10 |
- |
- |
Not Used |
| 11 |
0.5 WH |
5065 |
Center High Mounted Stop Lamp (CHMSL) Control |
| 12 |
0.35 TN |
755 |
RAP Relay Coil Control |
| 13 |
0.5 D-GN/YE |
6846 |
Rear License Lamp Control |
| 14 |
0.35 OG |
2268 |
Washer Fluid Pump Relay Control |
| 15 |
0.35 YE |
5199 |
Ignition Voltage |
| 16 |
0.35 GY |
91 |
Wiper Relay Control |
| 17 |
0.35 YE |
196 |
Windshield Wiper Motor Park Switch Signal |
| 18 |
0.5 WH |
5075 |
Current Sensor Signal |
| 19 |
- |
- |
Not Used |
| 20 |
0.5 RD/WH |
2340 |
Battery Positive Voltage |
| 21 |
0.5 PK |
5076 |
Current Sensor Voltage |
| 22 |
0.35 D-BU |
5985 |
Serial Data Wake - Up Signal |
| 23 |
0.35 L-BU |
5986 |
Serial Data Communication Enable |
| 24 |
0.35 PK/BK |
109 |
Hood Ajar Switch Signal |
| 25 |
- |
- |
Not Used |
| 26 |
0.5 BK |
2550 |
Ground |