LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Caprice 3.6 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Open the liftgate.
    2. NOTE:

    When a suitable hold open device is being removed or installed, provide alternate support.

  2. Install a suitable liftgate brace to the vehicle.
  3. Remove the left side rear compartment side trim panel access hole cover.
  4. Remove the battery. Refer to Battery Replacement .
  5. Remove the battery tray. Refer to Battery Tray Replacement .
    6. Fig 1: Fuel Pump Flow Control Module And Battery Tray
    GM2290952Courtesy of GENERAL MOTORS COMPANY
  6. Remove the fuel pump flow control module to battery tray underside retaining nut (2).
  7. Detach the fuel pump flow control module retainers (4).
  8. Remove the fuel pump flow control module (1) from the battery tray (3).
scientia non olet · About LEMON Manuals