LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - Repair Instructions >> Repair Instructions >> Filler Tube Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Fuel Fill Hose & Vent Hose
    GM562230Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel filler cap.
  2. Remove the left rear wheelhouse panel. Refer to Rear Wheelhouse Panel Liner Replacement .
  3. Disconnect the fuel fill hose (1) and the vent hose (2) from the fuel tank fill and vent pipe.
  4. Cap the open ends of the fuel fill hose (1) and the vent hose (2).
  5. Fig 2: View Of Fuel System Ground Strap
    GM43530Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the fuel system ground strap.
  7. Fig 3: View Of Fuel Filler Pocket & Fuel Tank Fill & Vent Pipe
    GM71231Courtesy of GENERAL MOTORS COMPANY
  8. Remove the fuel tank fill and vent pipe from the fuel filler pocket.