LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment System >> Repair Instructions >> Rear Camber Adjustment >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: Control Arm & Stabilizer Shaft Link
    GM922511Courtesy of GENERAL MOTORS COMPANY
  3. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts from the lower control arms.
  4. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts and links from the shaft.
scientia non olet · About LEMON Manuals