Front Caster and Camber Adjustment

Front Caster and Camber Adjustment





1. Loosen the lower control arm cam bolt nuts.

2. Rotate the cam bolts to the required caster or camber specification setting. Refer to Wheel Alignment Specifications Specifications.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Maintain the caster or camber setting while tightening the cam bolt nuts. Tighten the front lower control arm cam bolt nuts to 170 Nm (125 lb ft).

Note:
Check the toe setting AFTER changing camber or caster.

4. Check the caster and camber settings after tightening.

5. Adjust the caster and camber setting if necessary.