Connecting Rod, Engine

Connecting Rod Bolt

First pass 20 Nm (15 lb ft)
Final pass 85 degrees

Connecting Rod Bearing Clearance

Production 0.023-0.065 mm (0.0009-0.0025 in)
Service 0.023-0.076 mm (0.0009-0.003 in)

Connecting Rod Bore Diameter - Bearing End 56.505-56.525 mm (2.224-2.225 in)

Connecting Rod Bore Out-of-Round - Bearing End

Production 0.004-0.008 mm (0.00015-0.0003 in)
Service 0.004-0.008 mm (0.00015-0.0003 in)

Connecting Rod Side Clearance 0.11-0.51 mm (0.00433-0.02 in)