Fastener Tightening Specifications

Application	Specifications
Application	Metric	English
Accelerator Control Assembly to Floor Fasteners	20 N.m	15 lb ft
Camshaft Position (CMP) Sensor Bolt	25 N.m	18 lb ft
Crankshaft Position (CKP) Sensor Bolt	25 N.m	18 lb ft
Engine Coolant Temperature (ECT) Sensor	20 N.m	15 lb ft
EVAP Canister Bracket Bolt	7 N.m	62 lb in
Fuel and EVAP Pipe Retainer Nut	6 N.m	53 lb in
Fuel Crossover Hose Clamps	4 N.m	35 lb in
Fuel Filter and Fuel Pressure Regulator Bracket Nut	5 N.m	44 lb in
Fuel Pipe Assembly Clip Nuts	3 N.m	27 lb in
Fuel Rail Attaching Bolts	10 N.m	89 lb in
Fuel Tank Fill and Vent Pipe Bolts	3 N.m	22 lb in
Fuel Tank Fill Hose Clamp	4 N.m	35 lb in
Fuel Tank Fill Pipe Ground Strap Bolt	8 N.m	71 lb in
Fuel Tank Shield Mount Bolt	25 N.m	18 lb in
Fuel Tank Shield Nut	12 N.m	106 lb in
Fuel Tank Strap and Shield Bolts	25 N.m	18 lb ft
Heated Oxygen Sensor (HO2S)	41 N.m	30 lb ft
Ignition Coil Harness Mounting Bolt	12 N.m	106 lb in
Ignition Coil Mounting Bolts	12 N.m	106 lb in
Knock Sensor (KS)	20 N.m	15 lb ft
PCV Hose Assembly Mounting Cable Nut	12 N.m	106 lb in
Powertrain Control Module (PCM) Electrical Connector Fasteners	8 N.m	70 lb in
Powertrain Control Module (PCM) Retaining Fastener	2 N.m	17 lb in
Secondary Air Injection (AIR) Check Valves	23 N.m	17 lb ft
Secondary Air Injection (AIR) Check Valve to the AIR Pipe	23 N.m	17 lb ft
Secondary Air Injection (AIR) Pipe to Exhaust Manifold Bolts	20 N.m	15 lb ft
Secondary Air Injection (AIR) Pump to Bracket	9 N.m	80 lb in
Secondary Air Injection (AIR) Solenoid Valve Retaining Nut	7 N.m	62 lb in
Spark Plug	15 N.m	11 lb ft
Spark Plug in New Cylinder Head	20 N.m	15 lb ft
Tank Crossover Hose Clamp	4 N.m	35 lb in
Throttle Actuator Control (TAC) Module to PCM Bracket	2 N.m	17 lb in
Throttle Actuator Control (TAC) Module to PCM Bracket Fasteners	2 N.m	17 lb in
Throttle Body Attaching Bolts	10 N.m	89 lb in