Ignition Lock Key Transmitter Antenna Bracket Replacement

Fig 1: Ignition Lock Key Transmitter Antenna Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the ignition lock key transmitter antenna - rear compartment. Refer to Ignition Lock Key Transmitter Antenna Replacement - Rear Compartment .
1	Ignition Lock Key Transmitter Antenna Bracket Procedure Use a suitable tool to release the bracket. Remove double sided tape and clean surfaces using a appropriate solvent. When installing the bracket, apply new double sided tape. Press in place until secure.

Callout

Component Name

Preliminary Procedures
Remove the ignition lock key transmitter antenna - rear compartment. Refer to Ignition Lock Key Transmitter Antenna Replacement - Rear Compartment .

Ignition Lock Key Transmitter Antenna Bracket

Procedure

Use a suitable tool to release the bracket.
Remove double sided tape and clean surfaces using a appropriate solvent. When installing the bracket, apply new double sided tape. Press in place until secure.