LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 1.8L - Repair Instructions >> Repair Instructions >> Engine Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Locating Engine Control Module Components
    GM2189268Courtesy of GENERAL MOTORS COMPANY
  1. Install the engine control module (3) to the engine control module bracket (4).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 4 nuts (1) and tighten to 9 N.m (80 lb in).
  3. Clip the engine control module bracket (4) to the battery tray.
  4. Connect the 2 wiring harness plug (2) to the engine control module (3).
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  6. Program the ECM. Refer to Control Module References .
scientia non olet · About LEMON Manuals