Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Clip the 2 fuel pump flow control module clips (4) to the fuel pump flow control module bracket (2).
- Clip the fuel pump flow control module (3) to the fuel pump flow control module bracket clip (1).
Courtesy of GENERAL MOTORS COMPANY
- Plug the fuel pump flow control module wiring harness plug (2) to the fuel pump flow control module (1).
- Install the rear compartment side trim - right side. Refer to Rear Compartment Side Trim Replacement - Right Side
.
- Close the rear lid.
- Program the control module. Refer to Fuel Pump Flow Control Module Programming and Setup