LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 1.8L - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Engine Wiring Trough And DIS-ignition Module Wiring Harness Plug
    GM1937023Courtesy of GENERAL MOTORS COMPANY
  1. Remove the engine wiring harness guide (1) from the cylinder head.
  2. Disconnect the ignition coil plug (2).
    3. NOTE:

    Note the arrow on the cover.

  3. Remove the cover of the ignition coil in the direction of the arrow.
  4. Remove the 2 ignition coil bolts.
    5. Fig 2: Ignition Coil Module And Special Tool
    GM2026537Courtesy of GENERAL MOTORS COMPANY
  5. Install the EN-6009  remover/installer (1).
  6. Remove the ignition coil (2).
  7. Remove the EN-6009  remover/installer (1).
scientia non olet · About LEMON Manuals