Removal Procedure
- Remove the fuel tank. Refer to Fuel Tank Replacement .
- Disconnect the fuel tank vent pipe (1) and the fuel feed pipe (4) from the fuel tank fuel pump module (3).
- Disconnect the fuel tank fuel pump module wiring harness (2) from the fuel tank fuel pump module (3).
- Close the fuel feed pipe and the fuel tank vent feed pipe with suitable caps.
- Using the CH-45722 wrench and a long breaker-bar, rotate the fuel pump module lock ring in a counterclockwise direction in order to unlock the lock ring.
- Remove fuel tank fuel pump module lock ring (1).
- Remove the fuel tank fuel pump module (2).NOTE:
Lift the fuel tank fuel pump module up slightly.
- Remove and discard the fuel pump module seal (3).
- Remove the fuel level sensor from the fuel tank fuel pump module. Refer to Fuel Level Sensor Replacement .
NOTE:
Do NOT use impact tools. Significant force will be required to release the lock ring. The use of a hammer and screwdriver is not recommended. Secure the fuel tank in order to prevent fuel tank rotation.