LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Impala LS, Gas >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Pump Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Relieve the low and high side fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027) , Fuel Pressure Relief (CH 48027) .
  2. Remove the high pressure fuel pump shield. Refer to Fuel Pipe Shield Replacement .
    3. Fig 1: Identifying High Pressure Fuel Pump Components
    GM2221135Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the engine wiring harness electrical connector from the high pressure fuel pump.
  4. Remove the low pressure feed pipe. Refer to Fuel Feed Pipe Replacement .
  5. Remove the high pressure pipe. Discard the pipe. Refer to Fuel Feed Intermediate Pipe Replacement .
  6. Remove and discard the high pressure fuel pump bolts (1).
  7. Remove the high pressure fuel pump (2).
  8. Remove and discard the high pressure fuel pump O-ring (3).
  9. Remove and discard the high pressure fuel pump gasket (4).
  10. Remove the high pressure fuel pump roller lifter (5).
scientia non olet · About LEMON Manuals