LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Orlando LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls/Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement >> Assemble Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assemble Procedure

    Fig 1: Fuel Tank Vent Pipe And Evaporative Emission Canister
    GM2028245Courtesy of GENERAL MOTORS COMPANY
  1. Install the evaporative emission canister (1) to the evaporative emission canister bracket (3).
  2. Connect the evaporative emission canister purge pipe (4).
  3. Remove the CH-807  plug from the fuel tank vent pipe.
  4. Connect the fuel tank vent pipe (2).
  5. Install the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .
  6. Install the fuel tank heat shield. Refer to Fuel Tank Heat Shield Replacement (2.4L LAF) , Fuel Tank Heat Shield Replacement (2.0L Diesel LNP) .
scientia non olet · About LEMON Manuals