Removal Procedure
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
- Remove the fuel tank. Refer to Fuel Tank Replacement .
Courtesy of GENERAL MOTORS COMPANY
- Disconnect the electrical connectors (1).
- Disconnect the evaporative emission and fuel lines (2). Refer to Plastic Collar Quick Connect Fitting Service .
Courtesy of GENERAL MOTORS COMPANY
- Using the EN-48279
fuel sender lock ring wrench, remove the lock ring (1) by turning counter-clockwise.
Courtesy of GENERAL MOTORS COMPANY
- Remove the fuel pump module (1) and O-ring (2). Discard the seal.