LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Fresh Air Tube & Related Components
    GM2065375Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Disconnect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor.
  4. Disconnect the windshield washer hose clip from the corner of the air cleaner housing.
    5. Fig 2: Identifying Air Cleaner Components
    GM1860603Courtesy of GENERAL MOTORS COMPANY
  5. Loosen the air cleaner outlet duct clamp (1) at the throttle body.
  6. Loosen the 6 air cleaner housing cover screws (2).
  7. Separate the air cleaner outlet duct from the throttle body.
  8. Remove the air cleaner housing cover (3) (with outlet duct).
  9. Remove and discard the air cleaner element (4).
scientia non olet · About LEMON Manuals