Keyless Entry Control Module Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Keyless Entry Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the right body side trim panel. Refer to Body Side Trim Panel Replacement .
1	Keyless Entry Control Module Procedure Disconnect the electrical connectors. Unsnap the receiver from the bracket. For programming and set up, refer to Control Module References

Callout

Component Name

Preliminary Procedure:
Remove the right body side trim panel. Refer to Body Side Trim Panel Replacement .

Keyless Entry Control Module

Procedure

Disconnect the electrical connectors.
Unsnap the receiver from the bracket.
For programming and set up, refer to Control Module References