LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> Passenger Presence System Rezeroing >> Introduction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger Presence System Rezeroing: Introduction

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

The inflatable restraints passenger presence system is a calibrated system that requires re-zeroing or a zero check anytime the seat cushion trim attachments have been removed or the passenger presence system has been replaced. The procedures below are designed to assist in the re-zeroing of the passenger presence system. Before you start, read these procedures carefully and completely. For further information regarding the passenger presence system refer to Supplemental Inflatable Restraint System Description and Operation .

NOTE:

The following procedures must be followed:

  1. Read this procedure carefully and completely.
  2. The passenger presence system will not function properly if the passenger presence system re-zeroing procedure is not performed.
  3. Perform the Diagnostic Repair Verification after successfully completing the re-zeroing procedure to ensure the system is functioning properly.
scientia non olet · About LEMON Manuals