LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Impala LS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L (LFX) - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Fuel Tank Fill Pipe
    GM1618903Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel tank fill pipe.
    2. Fig 2: Fuel Tank, Clamp & Hose
    GM1554559Courtesy of GENERAL MOTORS COMPANY
  2. Install the fuel tank fill pipe hose (2) onto the fuel tank (3)
  3. Connect the vent pipe quick connect fitting to the fuel tank vent pipe quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service .
    4. CAUTION:

    Refer to Fastener Caution .

  4. Tighten the fuel fill pipe clamp (1) at the fuel tank and tighten to 2.5 N.m (22 lb in).
    5. Fig 3: Fill Pipe Bracket
    GM1554565Courtesy of GENERAL MOTORS COMPANY
  5. Install the EVAP line (2) to the bracket (3).
  6. Install the fill pipe bracket bolt (4) to the underbody rail and tighten to 13 N.m (115 lb in).
  7. Lower the vehicle.
    8. Fig 4: Locating Fuel Fill Pipe Screws To Fuel Filler Pocket
    GM1618880Courtesy of GENERAL MOTORS COMPANY
  8. Install the fuel fill pipe screws to the fuel filler pocket and tighten to 2.5 N.m (22 lb in).
scientia non olet · About LEMON Manuals