LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 1.2L - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement >> Assembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Procedure

  1. Install the fuel tank heat shield. Refer to Fuel Tank Heat Shield Replacement .
  2. Install the fuel pump. Refer to Fuel Pump Replacement .
  3. Install the evaporative emission canister. Refer to Evaporative Emission Canister Replacement .
    4. Fig 1: Evaporative Emission Canister Purge Pipe
    GM2809869Courtesy of GENERAL MOTORS COMPANY
  4. Install the fuel tank vent pipe (4).
  5. Install the evaporative emission canister purge pipe (1).
  6. Connect the fuel tank recirculation pipe connector (2).
  7. Connect the fuel tank wiring harness (3) electrical connectors to the following:
    • Fuel tank pump
    • Fuel tank pressure sensor
    • Evaporative emission canister solenoid valve
scientia non olet · About LEMON Manuals