Power Steering Pump Pulley Replacement

Fig 1: Power Steering Pump Pulley

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the power steering pump. Refer to Power Steering Pump Replacement .
1	Power Steering Pump Pulley Procedure Use the J 25034-C remover for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to remove the power steering pump pulley. Use the J 25033-C installer for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to install the power steering pump pulley. Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in). Special Tools J 25033-C Pulley Installer J 25034-C Pulley Remover SA9162C Power Steering Pump Pulley Remover/Installer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure
Remove the power steering pump. Refer to Power Steering Pump Replacement .

Power Steering Pump Pulley

Procedure

Use the J 25034-C remover for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to remove the power steering pump pulley.
Use the J 25033-C installer for Buick, GMC and Chevrolet or the SA9162C remover/installer for Saturn to install the power steering pump pulley.
Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in).

Special Tools

For equivalent regional tools, refer to Special Tools .