LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Traverse LS, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Throttle Body And Bolts
    GM1858235Courtesy of GENERAL MOTORS COMPANY
  1. Position a NEW throttle body gasket (1) and throttle body (2) to the upper intake manifold.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the throttle body bolts (3).

    Tighten 

    Tighten the bolts to 10 N.m (89 lb in).

    3. Fig 2: Electronic Throttle Control
    GM1858234Courtesy of GENERAL MOTORS COMPANY
  3. Connect the engine wiring harness electrical connector (2) to the electronic throttle control (1).
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  5. Perform the throttle learn procedure. Refer to Q38 Throttle Body: Throttle/Idle Learn .
scientia non olet · About LEMON Manuals